the other day, my gf and i went to ikea to pick up a few bits and pieces for the house. we got some cool stuff, most of it practical (plates, curtains, etc), but some less practical and more pretty. like this frame, which we both thought was super cool:

it’s pretty large (59 x 85cm), and we weren’t quite sure what to do with it - we just knew we liked it! on monday i had a brain wave, and turned the frame into a badge board:

here’s how i did it:
1. removed the glass and backing and set them aside, then used some E.S.P. to prepare the plastic surface to take paint.
2. added an undercoat to help cover the black.
3. used two coats of pretty rose-pink paint (a sample pot from the hardware store was more than enough), to make the frame the colour i wanted.
4. took the backing for the frame and used it as a template to cut out a piece of fabric that went with the pinkness of the frame, making sure i left about 1.5 inches overhang for securing it in place.
5. cut two ovals of thick soft quilt batting (i used leftovers from old quilting projects - this was good for using those bits up!), this time with no overhang.
6. laid the fabric down face down on my table, centered the two layers of batting on top of it, then centered the frame backing over this.
7. used small map pins to secure the fabric in place. these were inserted on an angle so they would be secure and wouldn’t poke through to the other side (this is also why i didn’t just use a staple gun). the fabric was pulled firmly but not stretched outrageously tight.
8. i took the whole backing-batting-fabric piece, and placed it in the frame, completing the project.

it’s now hanging on the wall in our room, looking after our many, many, many badges for us, and allowing us to admire them even when we’re not wearing them! hurray!

this project was suuuuper easy, and i think the result is quite awesome - i hope you do too!

essie xoxoxoxox

p.s. you won’t need the glass that’s left over at the end of this project, so you should either store it carefully for if you ever want to turn your badge board back into a frame, or recycle it.

This entry was posted on Wednesday, January 6th, 2010 at 5:43 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.